SPICE modelling of photoluminescence and electroluminescence based current-voltage curves of solar cells for concentration applications

Quantitative photoluminescence (PL) or electroluminescence (EL) experiments can be used to probe fast and in a non-destructive way the current-voltage (IV) characteristics of individual subcells in a multi-junction device, information that is, otherwise, not available. PL-based IV has the advantage that it is contactless and can be performed even in partly finished devices, allowing for an early diagnosis of the expected performance of the solar cells in the production environment. In this work we simulate the PL- and EL-based IV curves of single junction solar cells to assess their validity compared with the true IV curve and identify injection regimes where artefacts might appear due to the limited in-plane carrier transport in the solar cell layers. We model the whole photovoltaic device as a network of sub-circuits, each of them describing the solar cell behaviour using the two diode model. The sub-circuits are connected to the neighbouring ones with a resistor, representing the in-plane transport in the cell. The resulting circuit, involving several thousand subcircuits, is solved using SPICE

Photoluminescence-Based Current-Voltage Characterisation Of Individual Subcells In Multi-Junction Devices

We demonstrate a photoluminescence based, contactless method to determine the current-voltage characteristics of the individual subcells in a multi-junction solar cell. The method relies upon the reciprocity relation between the absorption and emission properties on a solar cell. Laser light with a suitable energy is used to excite carriers selectively in one junction and the internal voltages are deduced from the intensity of the resulting luminescence. The IV curves obtained this way on 1J, 2J and 6J devices are compared to those obtained using electroluminescence. Good agreement is obtained at high injection conditions while discrepancies at low injection are attributed to in-plane carrier transport

Quantifying parasitic losses from metal scattering structures in solar cells: How uncertainty in optical constants affects simulation results

The optical constants of many metals commonly used in solar cells, e.g. as contacts or for light trapping structures, are not documented consistently in the literature, with different sources giving different values. In the case of metallic structures designed to improve absorption in a solar cell junction, the use of data from different sources can give strongly varying results for the effectiveness of nanophotonic light-trapping structures. The trade-off between diffraction into more oblique orders in the junction, enhancing absorption in the photovoltaic material, and the number of photons absorbed parasitically in the metal means small differences in the optical constants can lead to different very conclusions about the EQE and J SC . This work documents the different optical constants for silver, aluminium, gold and titanium from several sources, the effect this has on plasmon quality factors, and quantifies the effect on modelling outcomes by considering the optimization of a test structure using a grid of metal nanodisks on the front surface of a thinned-down GaAs cell. Finally, we consider the effect for a structure previously predicted to give a very high J SC for a solar cell with an ultra-thin GaAs layer

Analytical expressions for the efficiency limits of radiatively coupled tandem solar cells

The limiting efficiency for series-connected multijunction solar cells is usually calculated from the assumption that the individual junctions are optically isolated. Here, we develop an analytical formalism to predict efficiencies attainable in the presence of luminescent coupling, i.e. if the individual junctions in a series-connected multi-junction stack are coupled optically, so that luminescence from one junction can be absorbed by the lower bandgap junction below. The formalism deals with non-radiative recombination through the definition of the luminescence extraction efficiency. Using our general formalism we find that the limiting efficiency of a tandem cell becomes much less dependent on exact bandgap combination when luminescent coupling is considered and proceed to consider two technologically important examples of current-mismatched tandem solar cells. We find that a series-connected GaAs on silicon tandem cell can be more efficient than the underlying silicon cell alone, if the luminescence extraction efficiency of the GaAs junction is sufficient. An analysis of luminescent coupling in a perovskite on silicon tandem cell shows that the efficiency penalty for a perovskite bandgap below the optimum value can be mitigated if the luminescence extraction efficiency is high. We suggest that material quality and stability might be more important considerations for perovskite on silicon tandems than engineering the bandgap to achieve precise current matching

Developing automated methods to estimate spectrally resolved direct normal irradiance for solar energy applications

We describe four schemes designed to estimate spectrally resolved direct normal irradiance (DNI) for multi-junction concentrator photovoltaic systems applications. The schemes have increasing levels of complexity in terms of aerosol and circumsolar irradiance (CSI) treatment, ranging from a climatological aerosol classification with no account of CSI, to an approach which includes explicit aerosol typing and type dependent CSI contribution. When tested against ground-based broadband and spectral measurements at five sites spanning a range of aerosol conditions, the most sophisticated scheme yields an average bias of þ 0:068%, well within photometer calibration uncertainties. The average spread of error is 2:5%. These statistics are markedly better than the climatological approach, which carries an average bias of 1:76% and a spread of 4%. They also improve on an intermediate approach which uses Angstrom€ exponents to estimate the spectral variation in aerosol optical depth across the solar energy relevant wavelength domain. This approach results in systematic under and over-estimations of DNI at short and long wavelengths respectively. Incorporating spectral CSI particularly benefits sites which experience a significant amount of coarse aerosol. All approaches we describe use freely available reanalyses and software tools, and can be easily applied to alternative aerosol measurements, including those from satellite

Solcore: A multi-scale, python-based library for modelling solar cells and semiconductor materials

Computational models can provide significant insight into the operation mechanisms and deficiencies of photovoltaic solar cells. Solcore is a modular set of computational tools, written in Python 3, for the design and simulation of photovoltaic solar cells. Calculations can be performed on ideal, thermodynamic limiting behaviour, through to fitting experimentally accessible parameters such as dark and light IV curves and luminescence. Uniquely, it combines a complete semiconductor solver capable of modelling the optical and electrical properties of a wide range of solar cells, from quantum well devices to multi-junction solar cells. The model is a multi-scale simulation accounting for nanoscale phenomena such as the quantum confinement effects of semiconductor nanostructures, to micron level propagation of light through to the overall performance of solar arrays, including the modelling of the spectral irradiance based on atmospheric conditions. In this article we summarize the capabilities in addition to providing the physical insight and mathematical formulation behind the software with the purpose of serving as both a research and teaching tool.Comment: 25 pages, 18 figures, Journal of Computational Electronics (2018

Assessing the operating temperature of multi-junction solar cells with novel rear side layer stack and local electrical contacts

Sub-bandgap sunlight provides a source of heat generation in solar cells that is detrimental to performance, especially in space applications where heat dissipation is limited. In this work we assess the impact that an advanced rear-side contact scheme for multi-junction solar cells has on the cell temperature. Our results show that this scheme reduces the optical power absorption below the bandgap of germanium by 81% compared to a standard, full metallization design. Measurements of the electrical and thermal power fluxes performed in vacuum demonstrate that this lower near-infrared light absorption results in 8% less heat dissipated in the cell with the novel rear-side contact scheme when operating at 25 ºC. Modelling of the operating temperature for both cells when fully encapsulated with glass indicates that this effect will also result in a reduction of the operating temperature of 9 ºC for the novel design

Photoluminescence upconversion at GaAs/InGaP2 interfaces driven by a sequential two-photon absorption mechanism

This paper reports on the results of an investigation into the nature of photoluminescence upconversion at GaAs/InGaP2 interfaces. Using a dual-beam excitation experiment, we demonstrate that the upconversion in our sample proceeds via a sequential two-photon optical absorption mechanism. Measurements of photoluminescence and upconversion photoluminescence revealed evidence of the spatial localization of carriers in the InGaP2 material, arising from partial ordering of the InGaP2. We also observed the excitation of a two-dimensional electron gas at the GaAs/InGaP2 heterojunction that manifests as a high-energy shoulder in the GaAs photoluminescence spectrum. Furthermore, the results of upconversion photoluminescence excitation spectroscopy demonstrate that the photon energy onset of upconversion luminescence coincides with the energy of the two-dimensional electron gas at the GaAs/InGaP2 interface, suggesting that charge accumulation at the interface can play a crucial role in the upconversion process